Rock Drilling Rig

Application: It is a new type of high-efficiency rock drilling equipment, which is widely used in medium and small mines and large-diameter blasthole rock drilling operations in road construction, national defense, water conservancy, and stone engineering.

  • Drilling Diameter: 50-80mm

  • Drilling depth: 10-15m

  • Motor Power: 3Kw

  Introduction Of Rock Drilling Rig

Rock Drilling Rig is an impact rotary drill. Its internal structure is different from that of a general rock drill. Its gas distribution and piston reciprocating mechanism are separate, namely the impactor. The front end is directly connected to the drill bit, and the rear end is directly connected to the drill rod. When drilling, the impactor dives into the hole, and through the gas distribution device (valve), the piston (cone) in the impactor reciprocates to hit the drill tail, so that the drill bit generates a gyratory force on the rock at the bottom of the hole.

  The Structure Of Rock Drilling Rig

1.Small size, light weight, suitable for large and medium-sized drilling rigs can not be used in places, convenient and flexible. Down-the-hole drilling rigs use electric energy as power, low noise, strong power. The drilling speed is 3-8 times that of ordinary rock drills, rock hardness DA up to 9, the drilling depth per hour is 8-16 meters.
2.The propulsion, rotation and impact are all powered by compressed air, with a simple structure, single power and easy relocation. There are three support structures to choose from: single top, double top and support type, which can adapt to any location and terrain. The control mechanism is centralized, and the operation is convenient and fast. The unique double muffler has good muffler effect and reduces environmental pollution.
3.With anti-stuck protection, when the drill is stuck, the motor is not easy to burn out and the reducer is not easy to be damaged.
4.Rock Drilling Rig adopts semi-automatic drill rod removal, which has high working efficiency

  MODEL &PARAMETERS

 

Model Fully pneumatic down-the-hole drilling rig Gas-electric down-the-hole drill
Drilling diameter 50-80mm 50-80mm
Drill rod 42 42
Drilling depth 10-15m 10-15m
Motor power 3Kw 3Kw
Drilling tool rotation speed 90-100r/min 90-100r/min
Main unit length 1524mm 1524mm
Thrust cylinder diameter 90mm 90mm
Main unit weight 110kg 148kg

(Please contact us for more model &parameters)

Related Projects of Rock Drilling Rig

Our Rock Drilling Rig had been exported to more than 200 countries including South Africa, India, Philippine, Malaysia, America, Germany, Pakistan, etc… The following is part of projects. Click More Projects for details.

Rock Drilling Rig in South Africa

Rock Drilling Rig in Philippine

Rock Drilling Rig in Pakistan

Rock Drilling Rig in Malaysia

Rock Drilling Rig Price

Specific price is determined by many factors, such as capacity, models, etc. As the advanced manufacturer and exporter in china, our Rock Drilling Rig are factory-direct sold, which offer you premium quality and better service.